Ecofix 24/7

Welcome To Ecofix247, We are at your service 24/7.




How to Unblock A Toilets

Is using a blocked toilet reminiscent of a bad dream? Do not worry; we have you covered! We’ll go over the six widely used methods for unclogging toilets today. Let’s first examine the different sorts of blockages as this will help us choose the most effective way to clear the clog.

Identify the Type of the Blockage

Slowly emptying the toilet of water is an indication that a clog is beginning to build. Do not wait for the toilet to become totally clogged after you observe this. Early on, it is considerably simpler to unblock.

The second kind of obstruction occurs when there is either very little or no water in the toilet bowl following a flush. This indicates that there is a problem with the waste pipe’s air circulation.

The last type of obstruction is a full blockage, which is indicated by the water level in the toilet bowl continuing to rise and not draining away. Move as much water as you can from the bowl into a different bucket and resist the urge to flush again if you have this kind of obstruction. If not, you run the danger of dealing with a much larger mess and water flowing everywhere.

To deal with a blocked toilet in London, contact a plumber if you are unable to determine the sort of obstruction.

Note: When there is a blockage in a waste outlet or toilet macerator, it is necessary to identify the cause of the obstruction and utilise unblocking techniques that are distinct from those applied to regular toilets. Your best option is to get in touch with a Saniflo plumber, who can assist you in clearing the obstruction without any hassles.

How to Unblock a Toilets with a Plunger

Firstly, we will look at a simple and effective way to unblock a toilet with a plunger. Follow those steps:

Step #1. Prepare the area

To stop spills, leaks, and overspills on the floor, cover the toilets bowl with old towels and newspapers. Put away your finest towels for a later day. It could be a good idea to have a bucket ready instead of trying to push down a blockage in case the case happens to pull up. To protect yourself, put on old clothes and rubber gloves.

Step #2. Prevent overflows

You’ll need to turn the shutoff valve to make sure the day doesn’t end in overflowing nightmares. Check the pipe that exits the wall behind the toilets for it. If it is not moving and you apply too much force, turn it in a clockwise direction, being careful not to accidently break it. To release the valve, you can spray a small amount of penetrating oil on it.

Deal with the float or flapper inside the water tank if that doesn’t work or if your older toilets doesn’t have a shutoff valve. Fear not—the water in the tank is identical to that which flows from the tap.

The big balloon- or ball-shaped component known as the float is what fills the tank with water as the water level falls because it sinks. It can be supported upright using something. As an alternative, you could shut the flapper. That’s the chain-hung circular drain stopper. After flushing, you can stop water from filling the tank by completing one of these three methods.

Step #3. Double-check your plunger

If the impediment is something other than a child’s toy, make sure you can remove it manually before using the plunger. It’s time to grab the plunger if that’s not the case. Make sure the plunger you are using is the right one; sinks require a plunger without a rubber flange that can fold back into the suction cup when not in use. Since there won’t be a tight seal around the hole, using the incorrect tool will make the task harder and take longer. You can soak the rubber in hot water for a few minutes to soften it and increase the plunger’s effectiveness.

Make sure the plunger is fully submerged in water and covering the pipe before you begin plunging. For optimal results, you can fill the toilets bowl with water directly from the sink.

Step #4. It’s time to Plunge

To remove the impediment, start by lifting up quickly and then pushing down gently and firmly to produce a seal. You’ll notice that the water is beginning to drain as you crank up the pace. Unclogging a toilets often takes at least fifteen minutes.

Some water may push the obstruction forward and loosen it during the draining process. If not, repeat the procedure after adding water to the toilets bowl to the regular level. It could take a few plunging attempts to clear some tough clogs made of hair or wet wipes.

Step #5. Clean your Tools

It’s crucial to thoroughly clean your tool after using it. The best method is to fill the toilets bowl with a solution of bleach and dish soap, then use the plunger to agitate the mixture for a few minutes. Next, flush the toilet twice to rinse it. This will further assist in clearing the obstruction.

How to Unblock a Toilet Without a Plunger

What occurs if you don’t have a plunger or if it doesn’t work properly? If so, we suggest using the following techniques to unclog a toilets without a plunger:

Unclog Your Loo with a Drain Auger

A toilets auger is essentially a long, flexible cable with a handle on one end and a corkscrew-shaped tip on the other. It is also referred to as a closet auger, drain auger or plumber’s snake. In order to prevent scratches on the toilet bowl, it also features a rubber covering. To learn how to use a snake to unclog a toilets, follow these steps:

Step #1. Insert the cable into the toilet

First, place the curved part of the auger at the curved part of the toilets bowl and insert it into the toilet. You must insert the auger farther if the cable is still visible.

Step #2. Rotate the handle until the blockage is clear

With one hand, grasp the auger housing, and slowly turn the handle with the other. Avoid applying excessive force as this can cause the cable to coil back. Gently twist the handle in a single direction until you encounter some resistance. You can safely presume that you have reached the barrier when you feel as though it cannot go any farther.

You can remove the impediment and the cable together if the corkscrew point punctures the blockage. Alternatively, the impediment can be securely flushed away if the tip breaks it up into tiny pieces.

Step #3. Get the cable out

Pull the cable out by spinning in the other direction if it can now go deeper than before and there is no longer any resistance.

Step #4. Test and repeat when necessary

Run a few toilets flushes to see if the blockage has been removed. Repeat the procedure if the water is not draining correctly.

After using the auger, clean it with a cloth or wash it and let it to air dry; do not store it wet as this may cause it to rust.

Use a Coat Hanger to Remove Clogs

You would need a wire coat hanger or, preferably, one with a plastic covering—to use this technique. The plastic-covered wire coat hangers won’t damage your toilets, and they are flexible enough to bend into a curve. To protect the toilet bowl, cover it with tape or an old rag if all you have is a basic wire coat hanger.

Place the improvised tool inside the drain and move it around to clear the obstruction. Push against the barrier if you feel it, and if you’re lucky, you should see the water begin to drain correctly. However, you may have trouble reaching a roadblock with this approach. This indicates that there is more pause below.

Unblock Your Toilet with Baking Soda and Vinegar

Sodium bicarbonate, sometimes referred to as baking soda, is a typical household item. Although baking soda is most commonly used as a rising agent in baking, it has a wide range of other uses. It combines with its accomplice, white vinegar, to produce a potent chemical reaction. Bathrooms are frequently cleaned with this mixture, especially those with limescale and soap residue. It can also be used to deodorise the waste pipes in your toilets.

If you are aware that the obstruction in your washbasin or toilets is not a solid object, you can quickly, cheaply and easily solve your problem by using vinegar and baking soda. The mixture is most effective at clearing obstructions brought on by an excess of trash. It is not advised to use this procedure, though, if you have a septic tank or cesspit, as it may interfere with the enzymes that allow them to function properly. The same applies to blocked drains; this easy-to-make remedy is quick and effective.

Try to Pour Some Hot Water

The easiest approach to unclog a toilets is to pour in hot water, especially if the obstruction is only partially present.

Make sure there is little water in the toilet bowl before you begin. If more water than is required, pour it into a bucket and drain it outside. To lubricate the waste exit and the bowl, pour some dishwashing liquid into it. After ten minutes, pour two to three litres of hot or warm water. You have to work quickly, so take care not to burn yourself. It is preferable to avoid using boiling or extremely hot water on toilet porcelain in order to protect both yourself and it.

You will be set if the water level drops in a few of minutes. If not, now is the moment to grab the plunger.

How to Unblock a Toilet with Chemicals

If everything else fails, you may attempt unblocking a toilet using chemicals or by calling a plumber. They have liquefying material certification. This only functions if there’s no hard item causing the obstruction. Chemical-based and enzyme-based drain cleaners are the two possibilities. Both your drains and the environment are safer when using enzyme products. Since chemical drain cleaners are frequently poisonous, make sure you follow the directions on the package if you decide to use one to unclog your toilet.

Why Does Your Toilet Keep Blocking?

Your toilet keeps clogging for three primary reasons:

  • The first is that your low-flow, older toilet does not have the pressure needed to unclog the trap and drain. If so, you might have to get a new toilet or cut back on the amount of toilet paper you use.
  • Flushable non-flushable objects (including baby wipes, cotton products, sanitary pads, toys, and other items) is the second reason.
  • The accumulation of limescale and toilet paper over time is the third and most frequent reason for recurrent obstructions.

How to Prevent Toilet Clogs

Here are a few easy ways to avoid clogged toilets:

  • Regularly clean the toilet to get rid of limescale accumulation.
  • Don’t flush anything that can’t be flushed.
  • Avoid flushing a lot of toilet paper down the toilet.
  • When doing repairs and renovations, keep an eye out for construction supplies.
  • Consider children’s toys carefully.
  • Tampons, shampoos, soaps, combs and other items should not fall. If this is not possible, keep the lid closed.
  • Food products, especially entire foods, should not be flushed.
  • Installing a water softener will eliminate hard water issues and terrible water-related damage.

Recent Posts

Water Hammer

Understanding and Stopping Water Hammer A Comprehensive Guide Water hammer, a common plumbing issue, can cause significant damage to your pipes if not addressed promptly.

Read More »

How to Fix a Leaking Shower: A Step-by-Step Guide Dealing with a leaking shower can be frustrating and costly if left unresolved. Whether you’re trying

Read More »
Washing Machine Leaking

Why Would a Washing Machine Leak from Underneath? A washing machine leaking from the bottom is a common yet troubling issue for many homeowners. Identifying

Read More »

Eco-friendly plumbing systems are environmentally conscious plumbing solutions that aim to reduce water and energy consumption while minimizing their impact on the environment. These systems

Read More »

Addressing Plumbing and Drainage Problems Solutions Plumbing and drainage issues can be a homeowner’s worst nightmare. From leaky faucets to clogged drains, these problems can

Read More »
Boiler Pressure

Boiler Pressure Too High Find Out Why and How to Reduce it Is your boiler pressure skyrocketing? Whether you’re dealing with a sudden surge or

Read More »